|
Corrugated Metal Gasket consists of
a metal core with concentric grooves on both sides,
coated with expanded graphite or PTFE layer. The
thickness of metal can be thinner, e.g. 3mm, 2mm,
1mm, 0.5mm, compared with Kammprofile gasket, and
the corrugation pitch is 3mm, 4mm or 6mm depending
on the width of the sealing face.
APPLICATION: have
been proven to be both reliable and cost-effective
for flange and heat exchange application,
especially used in low-pressure applications in
large diameter flue gas ducts at high temperature,
also suitable for uneven or distorted sealing
surfaces. It eliminates the problem of difficult
handing with large non-metal gaskets used in those
applications.
Outstanding mechanical strength
and thermal conductivity
Capable of withstanding high temperature
There are almost no limitations regarding size
Choice of insert metals easier
Trouble-free for handling and installation even
for large size
Other special metal is also
available on request.
Materials for the insert:
Flexible Graphite, PTFE, Non-asb, etc
Normal with thickness 0.5mm, 1mm,
1.5mm
|
